Lead Work in Wreay
Lead flashing repair and renewal at chimney stack junctions — preventing the water ingress that causes staining and structural damage in Cumbria's wet climate.
Lead Work in Wreay
Wreay customers looking for lead work turn to Sweep It Cumbria. Lead flashing seals the junction between your chimney stack and the roof covering. In Cumbria's wet climate, failed or cracked lead is one of the primary routes for rainwater into a property — staining ceilings, soaking roof timbers, and eventually tracking down to the chimney breast below. We repair and replace lead soakers, stepped flashings, and back-gutters at chimney stacks, using the correct grade of lead appropriately dressed and bonded to shed water clear. All lead is laid with the correct fall and overlap for long-term weathertightness in a high-rainfall environment. Wreay is a quiet village south of Carlisle best known for Sara Losh's unique 19th-century church — a Cumbrian architectural curiosity. The rural cottages in the village frequently have solid-fuel range cookers alongside the main chimney, and we service both the range and the flue in a combined visit.
Why Choose Sweep It Cumbria in Wreay?
Sweep It Cumbria brings the same standard of lead work to every property in Wreay, Cumbria. Lead flashing repair and renewal at chimney stack junctions — preventing the water ingress that causes staining and structural damage in Cumbria's wet climate.
Key Benefits
- ✓Lead soaker, stepped flashing, and back-gutter repair and renewal
- ✓Correct lead grade for the application — properly dressed and bonded
- ✓Prevents water ingress at the chimney-to-roof junction
- ✓Inspection of existing lead condition included before any work is priced
- ✓Fully insured
Free Survey in Wreay
Book a Free SurveyCall 07738 464850Also serving nearby: Carlisle, Dalston, Cumwhinton
Lead Work in Wreay — FAQ
Typical signs are a damp patch or staining on the ceiling near the chimney breast inside the property, visible lifting or cracking of the lead at the chimney-to-roof junction when viewed from outside, or bubbling and staining on wallpaper around the chimney breast.
Grade 4 lead is standard for soakers and stepped flashings at most chimney-to-roof joints. Grade 5 lead is used for larger horizontal surfaces such as back-gutters behind a chimney. We use the correct grade for each application to ensure longevity.
Ready for Your Lead Work in Wreay?
Book your free no-obligation survey in Wreay today.
